Need help with P2KCommander V-6.0.0 and V950 - fails to connect

[Domenic]

I am trying to get the P2KCommander to connect to the newer V950 Renegade from Sprint but with no success.
Here is my setup:
Windows XP Service Pack 3
Motorola Driver Installation 4.2.4
When the V950 is plugged into the USB port, Device Manager indicates a Motorola USB Modem #2 (COM3), Motorola USB Diagnostic Port (COM18) and the Motorola USB Composite Device.
The options in P2k Commander is set to the recommended default as indicated in the forum sticky.
Any help will be greatly appreciated.


I have included a view of the IPREPORT and snippet of the .log (they failed as attachments)

Windows IP Configuration
        Host Name . . . . . . . . . . . . : mymachine
        Primary Dns Suffix  . . . . . . . : corp.xxx.com
        Node Type . . . . . . . . . . . . : Mixed
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : corp.xxx.com
                                                    xxxx.com
                                                    xx.xxxx.com
Ethernet adapter Wireless Network Connection:
        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
        Physical Address. . . . . . . . . : 00-21-5C-51-01-F7
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 192.168.1.108
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DHCP Server . . . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 97.81.22.195
                                            24.177.176.38
                                            24.178.162.3
        Lease Obtained. . . . . . . . . . : Thursday, July 29, 2010 10:21:28 PM
        Lease Expires . . . . . . . . . . : Friday, July 30, 2010 10:21:28 PM

at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3
at+mode=8 --> COM3 ....

[s5vi]

hi
this is cdma phone
maybe you need MSU to connect phone
and after MSU connects run p2kcommander

MSU is official moto sw updater app

[Domenic]

Thanks for the tip. I went ahead and installed MSU. It actually updated my phone as well. Once the phone is plugged in I get MotoConnect to eventually indicate "Motorola phone has been successfully detected". Run P2KCommander I get
'No modem/p2k/usblan device found, NOT connected !' in the log window. I proceed to run MSU. It will not detect the phone automatically. I disconnect/reconnect the phone. MSU indicates phone is connected. As well, you see P2kCommander successfully connect.

I am able to view the various files on the phone.  I ventured over to the SEEMs. I drilled down to some of the security/unlock codes and unfortunately the folder contained no files. I tried a simple one like 'Phone Model Number' and it just hangs and never returns. I see "CMD: Answer packet invalid!" in the log window. Is P2KCommander a useful tool to manipulate this CDMA phone's SEEMs or is it beyond its scope? Thanks.